Shunxin supplies Plastic Heat-Resistant and Flame-Retardant Inner Lining Board for Car Doors for front and rear vehicle door interior applications. As a China manufacturer and factory, Shunxin uses PP/EPDM modified materials, PP-T20 or PC/ABS according to the required balance of rigidity, heat resistance, impact performance and appearance. The panel is produced by vacuum thermoforming and can be customized with door-specific dimensions, mounting features, surface textures and colors.
A Plastic Heat-Resistant And Flame-Retardant Inner Lining Board For Car Doors is the interior panel fitted to the inside of a vehicle door. It covers and organizes the inner door area while providing surfaces for components such as armrests, storage pockets, speaker openings and trim features. The panel also needs to maintain suitable rigidity, dimensional stability and surface quality during repeated door operation and exposure to elevated cabin temperatures.
PP/EPDM and other automotive-grade plastic materials can be selected for door panels exposed to sunlight and elevated interior temperatures. Material selection and structural reinforcement help control deformation and maintain the fit between the panel and adjoining components.
For automotive interior applications, suitable flame-retardant material grades can be specified according to the required vehicle standards. Shunxin can provide door lining boards designed around GB 8410 requirements where applicable.
Door panels are subject to repeated opening and closing, passenger contact and localized loading around handles or storage areas. PP/EPDM, reinforced PP and PC/ABS options can be selected according to the required rigidity and impact performance.
Plastic door lining boards provide a lower-weight alternative to traditional metal-based structures. Weight can be controlled through material selection and panel structure while maintaining the rigidity required for the intended application.
The visible surface can be customized with leather-grain, matte or other textures to match the vehicle interior. Color and surface appearance can be adjusted according to the vehicle's interior design specifications.
The panel can be designed with openings and structural areas for speakers, storage pockets, armrests, clips, fasteners and other door components, helping accommodate the vehicle's assembly layout.
For vehicle interior applications with environmental requirements, suitable material grades can be selected with attention to VOC and fogging performance.
Reinforcement features can be incorporated into the panel design to improve rigidity and reduce local deformation under repeated use.
Openings and mounting areas can be customized for speakers, switches, storage pockets, armrests, clips and other interior components.
Storage pockets, bottle holders and other door-side storage features can be incorporated according to the vehicle's interior layout.
Leather-grain and matte textures can be used to improve the visual consistency of the door interior and reduce unwanted surface reflection.
Front Door Inner Lining Board For driver- and passenger-side front doors in passenger vehicles.
Rear Door Inner Lining Board For rear passenger doors requiring customized dimensions and mounting structures.
Door Decorative Panel For visible decorative sections and trim areas on vehicle door interiors.
Door Storage Panel For door panels incorporating storage pockets, bottle holders or similar storage functions.
Armrest Support Area For door structures incorporating an integrated or separate armrest mounting area.
Typical Industries: Passenger vehicles, automotive interior components, new energy vehicles and automotive parts manufacturing.
Shunxin can customize the door lining board according to vehicle drawings, 3D data or dimensional specifications.
Customization can include:
· Overall dimensions
· Panel structure
· Reinforcement layout
· Speaker openings
· Storage pocket configuration
· Armrest mounting areas
· Clip and fastener locations
· Color
· Leather-grain or matte texture
· Automotive-Grade Material Options PP/EPDM, PP-T20 and PC/ABS available for different heat resistance, rigidity, impact and appearance requirements.
· Model-Specific Customization Dimensions, curvature, mounting points, speaker openings, storage areas and armrest structures can be customized to vehicle drawings.
· Lightweight Thermoformed Design Vacuum thermoforming supports lightweight door lining panels while accommodating different panel shapes and integrated structures.
· Surface and Interior Matching Leather-grain, matte, color and other surface options are available to match different vehicle interior designs.
Material selection, panel geometry and reinforcement design work together to control deformation and maintain dimensional stability. The vacuum thermoforming process is also controlled according to the material and panel structure.
Depending on the vehicle design, the Plastic Heat-Resistant And Flame-Retardant Inner Lining Board For Car Doors can include speaker openings, storage pockets, bottle holders, armrest mounting areas, clip locations and fastener openings.
Leather-grain texture improves the visual and tactile appearance of the door interior and can reduce noticeable surface reflection compared with a highly smooth finish.
Suitable PP/EPDM, PP-T20 or PC/ABS grades can be selected for elevated-temperature automotive interior applications. Actual temperature performance depends on the material grade, panel design and vehicle operating conditions.
Yes. Shunxin can customize panel dimensions, structure, mounting positions, texture and color based on vehicle drawings, 3D files or specified dimensions.
Material selection can take into account both flame-retardant and interior environmental requirements. Specific grades and testing requirements should be confirmed according to the target vehicle standard.
Address
No. 3 Jinfu Road, Pingnan Industrial Zone, Sanxiang Town, Zhongshan City, Guangdong Province, China.
Tel
